Tutorial 10: How to change your IP:
How to change your IP
First go to Start, Run A box Will come up, here is the following picture. And in the run box thing type CMD
Now a Black Box Should Open , it will show the following
And In the Box type Ipconfig/release And Some writing will show and you will be disconnected from the internet for about 5 seconds! If you did it right it should show...
Now Go to Start, Control Panel And Press on "Network Connections" Here is the following Picture:
Now after you click on it this picture will show, and now go to the Local Area Connection Click Properties And Go to the general Tab And Scroll Down And find InternetProtocol(TCP/IP) And Click on it twice!! Here is a picture:
Now Click On internet Protocol Twice!! And this screen will pop Up, Press Use the Following Ip address It can be 111,111,111 or anything!! Now press Tab Twice and it will Automatically Give you the subnet Gateway and The mask thing.
Now Press Ok On both! Now go back to Network Connections And press properties on the local area connection and go to the InternetProtocol(TCP/IP) and double click it. And now go to general tab and press Obtain the Ip Adress automatically press ok and then ok again you will be disconnected for 5 seconds and you will have a new IP address w00t!!